Fittings
MC Cable Connector, 1", (3) End Stops, Zinc Die Cast By Arlington 8412
1 inch, Screw-On Insulated Throat Zinc Die-Cast Connector with Endstops - For MCCable Range .78 to 1.12. Diameter: 1 in
$10.47
MC Cable Connector, 1-1/2", (3) End Stops, Zinc Die Cast By Arlington 8414
1-1/2 inch, Screw-On Insulated Throat Zinc Die-Cast Connector with Endstops - For MCCable Range 1.36 to 1.77. Diameter: 1 1/2 in
$17.01
EMT Compression Coupling, 3/4" Diameter, Raintight/Concrete Tight, Steel By Arlington 831RT
831RT
4103 In stock
$2.62
EMT Compression Coupling, 3/4" Diameter, Raintight/Concrete Tight, Steel By Arlington 831RT
EMT Compression Coupling, 3/4 Inch Diameter, Raintight and Concrete Tight, Steel
Diameter: 3/4 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$2.62
Conduit Body Gasket, Type Solid, Form 7, Size: 3/4", Neoprene By Appleton APPGASK572
APPGASK572
717 In stock
$2.71
Conduit Body Gasket, Type Solid, Form 7, Size: 3/4", Neoprene By Appleton APPGASK572
Conduit Body Gasket, Type: Solid, Form 7, 3/4 Inch, Neoprene
Family / Style: Form 7
Material: Neoprene
Hub Diameter: 3/4 in
$2.71
Liquidtight Sealing Gasket, 1/2", Steel Retainer By Appleton STG-50
Liquidtight Sealing Gasket, 1/2 Inch, Steel Retainer With Elastomer Seal, STG Series Sealing Gaskets Provide A Seal Between Shoulder of Connector and Sheet Metal Enclosure
Diameter: 1/2 in
Material: Neoprene
Material: Steel
$1.13
Rigid Strut Strap, 3/4", Stainless Steel 304 By Eaton B-Line B2009PASS4
B2009PASS4
85 In stock
$3.36
Rigid Strut Strap, 3/4", Stainless Steel 304 By Eaton B-Line B2009PASS4
Rigid Strut Strap, 3/4 Inch Diameter, Pre-Assmebled, Stainless Steel 304 304, For Use With Rigid/IMC ConduitMaterial: Stainless Steel
$3.36
Two Hole Corner Angle, Zinc Plated By Eaton B-Line B101ZN
Corner Angle Fitting, 90°, 2 Holes, Bolt Hole Diameter: 9/16 in, Material: Steel. Finish: Zinc Plated
Material: Steel
Mounting: 2-Hole
$2.56
EMT Compression Coupling, 3-1/2", Raintight, Steel/Zinc By American Fittings ERC350CPLGRT
ERC350CPLGRT
19 In stock
$208.40
EMT Compression Coupling, 3-1/2", Raintight, Steel/Zinc By American Fittings ERC350CPLGRT
EMT Compression Coupling, 3-1/2 Inch Diameter, Raintight, Steel With Zinc Chromate Finish, Approved for both Rigid and EMT Conduit
Diameter: 3 1/2 in
Material: Steel
Diameter: 3 1/2 in
Insulation: Non-Insulated
Finish: Zinc
Insulation: Non-Insulated
$208.40
1IN RIGID COMPRESSION COUPLINGS STEEL RAINTIGHT By American Fittings NT2762RT
NT2762RT
113 In stock
$18.81
1IN RIGID COMPRESSION COUPLINGS STEEL RAINTIGHT By American Fittings NT2762RT
1IN RIGID COMPRESSION COUPLINGS STEEL RAINTIGHT
Diameter: 1 1/2 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$18.81
Hammer-On Flange Clip, 1/8-1/4" By Orbit Industries FM24S
Hammer-On Flange Clip, Bottom-Mount With Stud, 1/8-1/4" Flange Thickness, 1/4" Rod, 1/4"-20 Thread, 3/8" Screw Length, Spring SteelMaterial: Spring Steel
$1.09
Cord Grip Connector Kit, 2" Diameter, Cord Range 1.380 - 2.060", Steel/Zinc By American Fittings CG200K
CG200K
95 In stock
$100.01
Cord Grip Connector Kit, 2" Diameter, Cord Range 1.380 - 2.060", Steel/Zinc By American Fittings CG200K
Cord Grip Connector Kit, 2 Inch Diameter, Cord Range 1.380 - 2.060 Inch, Steel With Zinc Chromate Finish
Material: Steel
Diameter: 2 in
Finish: Zinc
Diameter Range: 1.380 - 2.060 in
$100.01
B-LINE N524ZN SPRING NUT, 1/4-IN.-2 By Eaton B-Line N524ZN
BLI N524ZN SPRING NUT 1/4-IN- Size: 1/4 in
$1.27
1" Steel Form 7 Conduit Cover w/ Gasket By Hubbell-Killark 370G
1" Stamp Steel Form 7 Conduit Cover w/ Gasket
Size: 1 in
Material: Steel
Size: 1 in
$15.56
81% OFF
1/2''-13 Channel Nut Without Spring By Dottie SCN50
1/2''-13 Channel Nut Without Spring
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Diameter: 1/2 in
$2.01
$0.39
58% OFF
1" NPT Cable Glands, Diameter: 0.438 - 1", Aluminum By Remke Industries RSR-300-WR
RSR-300-WR
26 In stock
$11.65
$4.95
1" NPT Cable Glands, Diameter: 0.438 - 1", Aluminum By Remke Industries RSR-300-WR
1-Inch NPT Thread Type Cable Glands, Cable Diameter: 0.438 - 1 Inch, Material: Aluminum, NEMA 6/IP67
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Material: Aluminum
Material: Aluminum
Diameter Range: 1.500 - 1.701 in
$11.65
$4.95
82% OFF
Reducing Bushings Aluminum By American Fittings RB150100HAL
1.5 x 1 Reducing Bushings Aluminum USA (NPT)
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Diameter: 1 1/2 in
Diameter: 1 in
Material: Aluminum
Material: Aluminum
$12.09
$2.23
Cable/ Conduit To Rod/ Wire Clip, 14-2 To 12-3 MC/AC By Orbit Industries CC
Cable/ Conduit To Rod/ Wire Clip, 14-2 To 12-3 MC/ACMaterial: Spring Steel
$0.34
MC/AC/Flex Connector, Size: 3/4", Insulated, Zinc Die Cast By Arlington 7510AST
7510AST
76 In stock
$3.44
MC/AC/Flex Connector, Size: 3/4", Insulated, Zinc Die Cast By Arlington 7510AST
MC/AC/Flex Connector, Snap-In, Size: 3/4 Inch, Insulated, Wire Range: 14/2 - 10/4 AWG, Cable Diameter: 0.895 - 1.110 Inch, Zinc Die CastDiameter: 3/4 in
$3.44
Strut Clamp, Saddle Type, 1-1/4", Steel By Orbit Industries STS-125
Strut Clamp, Saddle Type, 1-1/4 Inch, Steel/Zinc Plated, Supports MC/AC, EMT and Rigid Conduit
Weight Capacity: 300 lbs
Material: Steel
$1.49
Pre-Assembled SSB-TBAR with UMAB-4R By Orbit Industries SSBT-4R
Pre-Assembled SSB-TBAR with UMAB-4R, Galvanized Steel. The box is 2-1/8" deep, and includes 10” grounding pigtail.Material: Galvanized Steel
$17.16
Roof Coupling, 1-1/2" Size, 8" x 8" Base Plate By Orbit Industries RCP-150
RCP-150
1 In stock
$20.39
Roof Coupling, 1-1/2" Size, 8" x 8" Base Plate By Orbit Industries RCP-150
Roof Coupling, 1-1/2 Inch Size, 8 Inch x 8 Inch Base Plate, Galvanized Steel
Material: Malleable Iron
Diameter: 1 1/2 in
$20.39
Box Support Bracket With T-Bar By Orbit Industries SSB-TBAR
Box Support Bracket With T-Bar Drop Ceiling Mount ClipsMaterial: Steel
$9.48
SNG WEAVE SUP GRP.5CBL SNG EYE By Pass & Seymour FC050-U
FC050U: Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.50 - 0.61 inches, Bale Length 7-in, Mesh Length 11-in, Break Strength 770 lbs.Length: 11 in
$43.30
Knockout Seal, Type: Snap-In, 2", Black, Non-Metallic By Arlington NM905
Knockout Seal, Type: Snap-In, 2 Inch, Black, Non-Metallic
Color: Gray
Color: Black
Material: Plastic
Diameter: 2 in
$1.85
97% OFF
Conduit Hub with Ground, 1/2" By Hubbell-Killark WH-1G
Conduit Hub with Ground, 1/2 Inch, Weather Proof, Zinc, Gray
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Color: Gray
Hub Diameter: 1/2 in
$28.31
$0.79
Conduit Hanger with Bolt, Steel, 1-1/2" Rigid By American Fittings CHB4US
Conduit Hanger with Bolt, 1-1/2" Rigid
Diameter: 1 1/2 in
Material: Steel
$5.74
1" Rain Tight Compression Connector By American Fittings ETR100RT
1" Rain Tight Compression Connector, EMT Compression - Rigid End Threaded/Zinc Plated, Material: Steel
Diameter: 1 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$13.48
1 In 90 Deg Bushed Elb By Appleton LMFL90100
1" Diameter, 90° Male to Female Long Bushed Elbow, Material: Malleable Iron
Material: Malleable Iron
Diameter: 4 in
Insulation: Non-Insulated
Insulation: Non-Insulated
$22.74
1/2" Rigid Steel Conduit-To-LT By American Fittings STRNT 50RT
1/2-Inch Rigid Steel Conduit-To-Liquidtight Adapter
Diameter: 1/2 in
Material: Alloy Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$8.93
EMT Combination Couplings, EMT to Rigid, 1-1/4", Steel By Appleton TWR125
EMT Combination Couplings, EMT to Rigid, 1-1/4 Inch, Material: Steel, For Use With EMT/Rigid Conduit.
Diameter: 1 1/4 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$27.36
