Fittings
Cable to wood or metal stud support By nVent Caddy CJ6
Colorado Jim Cable Support to Metal or Wood Studs, Hammer-On, Accommodates Up To 6 Conductors, 6-2 With Ground to 14-2 AWG, For Use With Non-Metallic Sheathed Cable or Metal Clad Cable, Includes Easy Locking Tabs, Cable Locating Ribs To Maintain...
$126.82
Liquidtight Connector, Straight, 3/8", Steel By Appleton ST38
Liquidtight Connector, 3/8 Inch, Straight, Zinc Electroplated Steel
Diameter: 3/8 in
Material: Steel
Diameter: 3/8 in
$5.33
MC Cable Connector, 1-1/2", (3) End Stops, Zinc Die Cast By Arlington 8414
1-1/2 inch, Screw-On Insulated Throat Zinc Die-Cast Connector with Endstops - For MCCable Range 1.36 to 1.77. Diameter: 1 1/2 in
$17.01
EMT Compression Coupling, 3/4" Diameter, Raintight/Concrete Tight, Steel By Arlington 831RT
831RT
4731 In stock
$2.62
EMT Compression Coupling, 3/4" Diameter, Raintight/Concrete Tight, Steel By Arlington 831RT
EMT Compression Coupling, 3/4 Inch Diameter, Raintight and Concrete Tight, Steel
Diameter: 3/4 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$2.62
Conduit Body Gasket, Type Solid, Form 7, Size: 3/4", Neoprene By Appleton APPGASK572
APPGASK572
869 In stock
$2.71
Conduit Body Gasket, Type Solid, Form 7, Size: 3/4", Neoprene By Appleton APPGASK572
Conduit Body Gasket, Type: Solid, Form 7, 3/4 Inch, Neoprene
Diameter: 3/4 in
Family / Style: Form 7
Material: Neoprene
$2.71
Liquidtight Connector, 1/2", Straight, Non-Metallic By Arlington NMLT50
Liquidtight Connector, Straight, 1/2 inch, UV Rated Plastic, Sealing Ring, Material: Non-Metallic, For Non-Metallic Liquidtight - Type B; Flexible Non-Metallic Tubing, UL, CSA Diameter: 1/2 in
$2.24
1/2" Liquid Tight Sealing Ring By Orbit Industries LTSR-50
1/2 Inch Liquid Tight Sealing Ring, Neoprene Rubber Gasket, Steel RetainerSize: 1/2 in
$0.44
Rigid Strut Strap, 3/4", Stainless Steel 304 By Eaton B-Line B2009PASS4
B2009PASS4
97 In stock
$3.32
Rigid Strut Strap, 3/4", Stainless Steel 304 By Eaton B-Line B2009PASS4
Rigid Strut Strap, 3/4 Inch Diameter, Pre-Assmebled, Stainless Steel 304 304, For Use With Rigid/IMC ConduitMaterial: Stainless Steel
$3.32
Corner Angle Fitting, 90°, 2-Hole, Bolt Hole: 9/16", Stainless Steel By Eaton B-Line B230SS4
B230SS4
109 In stock
$11.38
Corner Angle Fitting, 90°, 2-Hole, Bolt Hole: 9/16", Stainless Steel By Eaton B-Line B230SS4
Corner Angle Fitting, 90°, 2 Holes, Bolt Hole Diameter: 9/16 in, Material: 304 Stainless Steel.
Material: Stainless Steel
Mounting: 2-Hole
$11.38
EMT Compression Coupling, 3-1/2", Raintight, Steel/Zinc By American Fittings ERC350CPLGRT
ERC350CPLGRT
20 In stock
$208.40
EMT Compression Coupling, 3-1/2", Raintight, Steel/Zinc By American Fittings ERC350CPLGRT
EMT Compression Coupling, 3-1/2 Inch Diameter, Raintight, Steel With Zinc Chromate Finish, Approved for both Rigid and EMT Conduit
Diameter: 3 1/2 in
Material: Steel
Diameter: 3 1/2 in
Insulation: Non-Insulated
Finish: Zinc
Insulation: Non-Insulated
$208.40
1" Liquid Tight Sealing Ring By Orbit Industries LTSR-100
1 Inch Liquid Tight Sealing Ring, Neoprene Rubber Gasket, Steel Retainer
Size: 1 in
Size: 1 in
$0.83
Cord Grip Connector Kit, 2" Diameter, Cord Range 1.380 - 2.060", Steel/Zinc By American Fittings CG200K
CG200K
80 In stock
$100.01
Cord Grip Connector Kit, 2" Diameter, Cord Range 1.380 - 2.060", Steel/Zinc By American Fittings CG200K
Cord Grip Connector Kit, 2 Inch Diameter, Cord Range 1.380 - 2.060 Inch, Steel With Zinc Chromate Finish
Material: Steel
Diameter: 2 in
Finish: Zinc
Diameter Range: 1.380 - 2.060 in
$100.01
B-LINE N524ZN SPRING NUT, 1/4-IN.-2 By Eaton B-Line N524ZN
BLI N524ZN SPRING NUT 1/4-IN- Size: 1/4 in
$1.25
Reducing Bushings Aluminum By American Fittings RB150100HAL
1.5 x 1 Reducing Bushings Aluminum USA (NPT)
Diameter: 1 1/2 in
Diameter: 1 in
Material: Aluminum
Material: Aluminum
$12.09
Cable/ Conduit To Rod/ Wire Clip, 14-2 To 12-3 MC/AC By Orbit Industries CC
Cable/ Conduit To Rod/ Wire Clip, 14-2 To 12-3 MC/ACMaterial: Spring Steel
$0.34
MC/AC/Flex Connector, Size: 3/4", Insulated, Zinc Die Cast By Arlington 7510AST
7510AST
75 In stock
$3.44
MC/AC/Flex Connector, Size: 3/4", Insulated, Zinc Die Cast By Arlington 7510AST
MC/AC/Flex Connector, Snap-In, Size: 3/4 Inch, Insulated, Wire Range: 14/2 - 10/4 AWG, Cable Diameter: 0.895 - 1.110 Inch, Zinc Die CastDiameter: 3/4 in
$3.44
Strut Clamp, Saddle Type, 1-1/4", Steel By Orbit Industries STS-125
Strut Clamp, Saddle Type, 1-1/4 Inch, Steel/Zinc Plated, Supports MC/AC, EMT and Rigid Conduit
Weight Capacity: 300 lbs
Material: Steel
$1.49
53% OFF
Pre-Assembled SSB-TBAR with UMAB-4R By Orbit Industries SSBT-4R
Pre-Assembled SSB-TBAR with UMAB-4R, Galvanized Steel. The box is 2-1/8" deep, and includes 10” grounding pigtail.
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Material: Galvanized Steel
$17.16
$8.05
72% OFF
Roof Coupling, 1-1/2" Size, 8" x 8" Base Plate By Orbit Industries RCP-150
RCP-150
32 In stock
$20.39
$5.70
Roof Coupling, 1-1/2" Size, 8" x 8" Base Plate By Orbit Industries RCP-150
Roof Coupling, 1-1/2 Inch Size, 8 Inch x 8 Inch Base Plate, Galvanized Steel
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Material: Malleable Iron
Diameter: 1 1/2 in
$20.39
$5.70
83% OFF
Strut Nut, 12 Gauge, 3/8" - 16 By Power-Strut P3019-3816EG
Strut Nut, 12 Gauge, 3/8" - 16, Electrogalvanized Steel
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Gauge: 12
Material: Steel
$4.25
$0.73
Box Support Bracket With T-Bar By Orbit Industries SSB-TBAR
Box Support Bracket With T-Bar Drop Ceiling Mount ClipsMaterial: Steel
$9.48
SNG WEAVE SUP GRP.5CBL SNG EYE By Pass & Seymour FC050-U
FC050U: Standard Duty, Closed Mesh, Single-Eye Grip, Cable Diameter 0.50 - 0.61 inches, Bale Length 7-in, Mesh Length 11-in, Break Strength 770 lbs.Length: 11 in
$43.30
Split Grounding Bushing, 1-1/2", 14 - 1/0 AWG, Zinc Die Cast By Arlington 554
554
57 In stock
$16.23
Split Grounding Bushing, 1-1/2", 14 - 1/0 AWG, Zinc Die Cast By Arlington 554
Split Grounding Bushing, 1-1/2 Inch Diameter, 14 - 1/0 AWG, Zinc Die Cast, For Use With Threaded or Unthreaded Rigid/IMC/EMT Conduit Diameter: 1 1/2 in Material: Zinc Die Cast Insulation: Insulated Allowable Gauge Range: 14 - 1/0 Material: Zinc Die...
$16.23
Knockout Seal, Type: Snap-In, 2", Black, Non-Metallic By Arlington NM905
Knockout Seal, Type: Snap-In, 2 Inch, Black, Non-Metallic
Color: Gray
Color: Black
Material: Plastic
$1.85
Conduit Hanger with Bolt, Steel, 1-1/2" Rigid By American Fittings CHB4US
Conduit Hanger with Bolt, 1-1/2" Rigid
Diameter: 1 1/2 in
Material: Steel
$5.74
1-1/4 In 90 Deg Bushed Elb By Appleton LMFL90125
App Lmfl90-125 1-1/4mall bush Ed Ell
Material: Steel
Diameter: 2 in
Insulation: Non-Insulated
Insulation: Non-Insulated
$34.30
1/2" Rigid Steel Conduit-To-LT By American Fittings STRNT 50RT
1/2-Inch Rigid Steel Conduit-To-Liquidtight Adapter
Diameter: 1/2 in
Material: Alloy Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$8.93
3/4" Rain Tight Compression Connector By American Fittings ETR 75RT
3/4" Rain Tight Compression Connector, EMT Compression - Rigid End Threaded/Zinc Plated, Material: Steel
Diameter: 3/4 in
Insulation: Non-Insulated
Insulation: Non-Insulated
$6.62
EMT Combination Couplings, EMT to Rigid, 1-1/4", Steel By Appleton TWR125
EMT Combination Couplings, EMT to Rigid, 1-1/4 Inch, Material: Steel, For Use With EMT/Rigid Conduit.
Diameter: 1 1/4 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$27.36
ROD & WIRE FASTENER By Eaton B-Line BW-20
ROD & WIRE FASTENER
Diameter: 1 1/4 in
Material: Steel
$4.05
