Fittings
MC/AC Cable Support Bracket, 14-3 to 10-2 MC/AC, 4 Cable By nVent Caddy MCS50
MCS50
934 In stock
$2.87
MC/AC Cable Support Bracket, 14-3 to 10-2 MC/AC, 4 Cable By nVent Caddy MCS50
MC/AC cable support spacer for up to 4 runs - Nominal outside diameters from .560 thru .690. Standard Package Quantity: 50.
Material: Steel
Finish: Electrogalvanized
Standards: Build America Buy America Compliant
$2.87
Reducing Bushing, 3/4 x 1/2", Steel With Zinc Finish By American Fittings RB 7550
RB 7550
870 In stock
$1.18
Reducing Bushing, 3/4 x 1/2", Steel With Zinc Finish By American Fittings RB 7550
Reducing Bushing, 3/4 x 1/2 Inch, Steel With Zinc Finish, For Use With Rigid/IMC Conduit in Ordinary Locations
Diameter: 3/4 in
Diameter: 1/2 in
Material: Steel
Finish: Zinc
$1.18
Liquidtight Connector, 1/2", Straight, Non-Metallic By Thomas & Betts LT43D-NEW
LT43D-NEW
5083 In stock
$4.17
Liquidtight Connector, 1/2", Straight, Non-Metallic By Thomas & Betts LT43D-NEW
Liquidtight Connector, Straight, 1/2 Inch Diameter, Two-Piece Type, PVC With Nitrile O-Ring, Gray, For Use With Carflex conduit and Carflex X-Flex Conduit
Diameter: 1/2 in
Material: PVC
$4.17
Liquidtight Connector, 45°, 3/4", Non-Metallic By Arlington NMLT4575
Liquidtight Connector, 45°, 3/4 Inch, Non-Metallic, For Type B
Diameter: 3/4 in
Material: Plastic
$5.41
Liquidtight Connector, 90°, 1/2", Type Snap-On, Non-Metallic By Arlington NMLT905
NMLT905
68 In stock
$3.55
Liquidtight Connector, 90°, 1/2", Type Snap-On, Non-Metallic By Arlington NMLT905
Non-Metallic Snap 2 it Liquidtight Connector, 90°, 1/2 inch, UV Rated Plastic, Sealing Ring, For Non-Metallic Liquidtight - Type B; Flexible Non-Metallic Tubing, UL, CSA Diameter: 1/2 in
$3.55
Connector, 1", ENT, Threaded Male Adapter, Orange By Carlon A343F
1" Orange Plenum Thread Adapter for use with Plenum-Gard.
Diameter: 1 in
Material: PVC
$7.11
3-Piece Knockout Seal, 3/4", Steel By Dottie D20S
3/4", Knockout Seal, 3-Piece, Steel, Sold by Each, Package Quantity: 50. *Dottie Part # 10242*
Diameter: 3/4 in
Material: Steel
$2.24
3-Piece Knockout Seal, 1/2", Steel By Dottie D10S
1/2", Knockout Seal, 3-Piece, Steel, Sold by Each, Package Quantity: 100. *Dottie Part # 10240*
Diameter: 1/2 in
Material: Steel
$1.68
EMT Compression Coupling, 1" Diameter, Rain Tight, Steel/Zinc By American Fittings EC762USRT
EC762USRT
596 In stock
$5.81
EMT Compression Coupling, 1" Diameter, Rain Tight, Steel/Zinc By American Fittings EC762USRT
EMT Compression Coupling, 1 Inch Diameter, Rain Tight, Steel With Zinc Chromate Finish
Diameter: 1 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$5.81
End Cap, Decorative, Steel/Galvanized By Power-Strut P6152EG
Decorative End Cap, Finish: Electro Galvanized. Use with PS 200 Series. Material: Steel
$5.45
NM Cable Connector, 3/4", Push In, Plastic By Arlington NM95
3/4" NM Cable Connector, Push In, Plastic
Diameter: 3/4 in
Material: Plastic
$0.46
Push-In Connector, 3/4", For Non-Metallic/Flexible Cord By Arlington NM842
Push-In Connector, 3/4 Inch, For Non-Metallic/Flexible Cord - K.O. Size 3/4 Inch
Diameter: 3/4 in
Material: Plastic
$0.69
Angle Bracket, Steel, PG, 0.25" Holes By nVent Caddy AB
Angle Bracket w/ 1/4" hole. Standard Packaging Quantity: 100.
Package Quantity: 100
Diameter: 1/4 in
Material: Steel
Mounting: 2-Hole
Standards: Build America Buy America Compliant
$71.72
Snap-In Knockout Bushing, 3/4",Plastic By Arlington 4401
3/4", Snap-In Bushing, Non-Metallic, Package Quantity: 100. For use with all Knockouts.
Diameter: 3/4 in
Material: Plastic
$0.22
Telescoping box bracket 17"–26" stud space 1 1/2", 2 1/8", 2 1/2" box depth By nVent Caddy TSGB24
TSGB24
2122 In stock
$6.64
Telescoping box bracket 17"–26" stud space 1 1/2", 2 1/8", 2 1/2" box depth By nVent Caddy TSGB24
Telescoping Screw Gun Bracket 17" to 26" (432 mm- 660 mm) Stud Spacing. Load Limit: 50 lbs. Standard Packaging Quantity: 50.
Material: Steel
Finish: Pre-Galvanized
Standards: Build America Buy America Compliant
$6.64
1/2" Liquid Tight Sealing Ring By Orbit Industries LTSR-50
1/2 Inch Liquid Tight Sealing Ring, Neoprene Rubber Gasket, Steel RetainerSize: 1/2 in
$0.44
Rigid Threaded Coupling, 1-1/4", Cast Steel By Orbit Industries RC-125
Rigid Threaded Coupling, 1-1/4 Inch, Cast Steel/Zinc Plated, For Use With Rigid/IMC Conduit
Material: Malleable Iron
Diameter: 1 in
Insulation: Non-Insulated
Finish: Zinc
Insulation: Non-Insulated
$3.96
Rigid Strut Strap, 3/4" By Superstrut 702-3/4-EG
Rigid Strut Strap, 3/4 Inch, Material: Steel, Finish: Electro-Galvanized, For Use With Rigid/IMC Conduit
Diameter: 3/4 in
Material: Steel
$1.29
Split Grounding Bushing, 3/4", 14 - 4 AWG, Zinc Die Cast By Arlington 551
Split Grounding Bushing, 3/4 Inch Diameter, 14 - 4 AWG, Zinc Die Cast, For Use With Threaded or Unthreaded Rigid/IMC/EMT Conduit Diameter: 3/4 in Material: Zinc Die Cast Insulation: Insulated Allowable Gauge Range: 14 - 4 Material: Zinc Die Cast...
$10.02
Box/Conduit Hanger, 1/2"" - 3/4"" EMT By Orbit Industries F812MB18A
Box/Conduit Hanger, 1/2"" - 3/4"" EMT, 1/4" Hole, Pre-Galvanized Steel Hanger/Spring Steel Clamps
Material: Spring Steel
Size: 1/2 in
Size: 3/4 in
Material: Pre-Galvanized Steel
$4.45
Angle Bracket, Steel By Orbit Industries AB4
Angle Bracket, 1/4 Inch Side Hole, 1/4 Inch Bottom Hole, SteelMaterial: Steel
$0.37
MC/AC Cable to Stud Clip, 14-2 to 10-3 MC/AC, Steel By Orbit Industries FMAC2
FMAC2
1878 In stock
$0.64
MC/AC Cable to Stud Clip, 14-2 to 10-3 MC/AC, Steel By Orbit Industries FMAC2
MC/AC Cable to Stud Clip, 14-2 to 10-3 MC/AC, SteelMaterial: Steel
$0.64
Combination Coupling, EMT to Flex, 1/2 to 3/8 inch, Zinc Die Cast. By Arlington 860
860
79 In stock
$3.70
Combination Coupling, EMT to Flex, 1/2 to 3/8 inch, Zinc Die Cast. By Arlington 860
EMT Combination Coupling, Type: EMT Set Screw to Flexible Metal Conduit, Size: 1/2 to 3/8 inch, Material: Zinc Die Cast
Diameter: 1/2 in
Diameter: 3/8 in
Insulation: Non-Insulated
Diameter: 3/8 in
Insulation: Non-Insulated
$3.70
Combination Nut Washer, 1/4"- 20" Thread, 0.564 x 0.575 x 1.575", Steel By Eaton B-Line NW524ZN
NW524ZN
412 In stock
$2.95
Combination Nut Washer, 1/4"- 20" Thread, 0.564 x 0.575 x 1.575", Steel By Eaton B-Line NW524ZN
Combination Nut Washer, 1/4"- 20" Thread, 0.564 x 0.575 x 1.575 Inch, Steel with Zinc Finish
Diameter: 1/4 in
Material: Steel
Finish: Zinc
$2.95
Liquidtite to EMT Combination Coupling, 1-1/4" By American Fittings STREMT125
STREMT125
216 In stock
$46.79
Liquidtite to EMT Combination Coupling, 1-1/4" By American Fittings STREMT125
Liquidtite to EMT Combination Coupling, 1-1/4 inch, Material: Steel
Diameter: 1 1/4 in
Material: Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$46.79
1-1/4 Inch EMT Compression to Flex Adapted, Solid By American Fittings FLXEMT125
FLXEMT125
75 In stock
$22.69
1-1/4 Inch EMT Compression to Flex Adapted, Solid By American Fittings FLXEMT125
1-1/4 Inch EMT Compression to Flex Adapted, Solid Alloy Steel
Diameter: 1 1/4 in
Material: Alloy Steel
Insulation: Non-Insulated
Insulation: Non-Insulated
$22.69
2-1/2" LR PVC Conduit Fitting 212PLR
Conduit Body, Type: LR, Size: 2-1/2", Material: PVC. Includes: Cover & Gasket.
Material: PVC
Diameter: 2 1/2 in
$97.23
SIMPush 3/4" NM Liquidtight Coupling By Southwire LTNMCP075WT
SIMPush Non-Metallic Liquidtight Coupling, Size: 3/4", Material: PVC
Diameter: 3/4 in
Material: PVC
$1.15
1/2" Neoprene Gasket By Mulberry Metal 11720
Conduit Body Gasket, Type: Solid, Size: 1/2", Material: Neoprene.
Material: Neoprene
Hub Diameter: 1/2 in
$0.76
Conduit Hanger with Bolt, 1/2", 1/4" Mounting Hole, Stainless Steel By Calbrite S60500MH00
S60500MH00
102 In stock
$3.48
Conduit Hanger with Bolt, 1/2", 1/4" Mounting Hole, Stainless Steel By Calbrite S60500MH00
Conduit Hanger with Bolt, 1/2 Inch, 1/4 Inch Mounting Hole, 316 Stainless Steel, For Use With Rigid Conduit
Diameter: 1/2 in
Material: 316 Stainless Steel
$3.48
