Fittings
3 1/2" PVC Conduit Cap 312PCA
3 1/2" PVC Conduit Cap.
Diameter: 3 1/2 in
Material: PVC
Diameter: 3 1/2 in
$15.53
SIMPush 3/4" NM Liquidtight 90 Connector By Southwire LTNM90075WT
SIMPush Non-Metallic Liquidtight 90 Connector, Size: 3/4", Material: PVC
Diameter: 3/4 in
Material: PVC
$2.25
SIMPush 1" EMT Pull Elbow By Southwire EPE100WT
SIMPush EMT Pull Elbow, 90 Degree, Size: 1", Insulated, Material: Copper-Free Aluminum
Diameter: 1 in
Material: Aluminum
Material: Aluminum
Insulation: Insulated
Insulation: Insulated
$5.35
66% OFF
Combination Compression Coupling, EMT to Flex, EMT: 1/2", Flex: 3/8" By Arlington GF860
GF860
1104 In stock
$3.69
$1.26
Combination Compression Coupling, EMT to Flex, EMT: 1/2", Flex: 3/8" By Arlington GF860
1/2 inch EMT to 3/8 inch Flex Coupling, Zinc Die Cast.
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Diameter: 1/2 in
Material: Steel
$3.69
$1.26
1-1/4" to 3/4" PVC Conduit Reducer, Gray 11434PR
1-1/4" to 3/4" PVC Conduit Reducer, Gray, For Use With Schedule 40 and 80 PVC Conduit
Diameter: 3/4 in
Diameter: 1 1/4 in
Material: PVC
$6.01
Sold Out
Rigid Elbow, 1/2", Long, Male to Female, 90°, Malleable Iron By Appleton LMFL9050
LMFL9050
42 In stock
$7.18
Rigid Elbow, 1/2", Long, Male to Female, 90°, Malleable Iron By Appleton LMFL9050
1/2" Diameter, 90° Male to Female Long Bushed Elbow, Material: Malleable Iron.
Material: Malleable Iron
Diameter: 1/2 in
Insulation: Non-Insulated
Insulation: Non-Insulated
$7.18
82% OFF
1 inch EMT Set Screw Connector 1EDCSSCN
EMT Set Screw Connector, 1 inch, Non-Insulated Throat, Material: Die Cast Zinc, Concrete Tight.
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Diameter: 1 in
$2.17
$0.40
Knockout Seal, 2", Snap-In, Steel By Dottie KO200
2", Knockout Seal, Snap-In, Steel
Material: Steel
Diameter: 2 in
Standards: California Proposition 65
$2.93
Telescoping Strut Replacement, 3/8" Rod By nVent Caddy TSR1220
Telescoping Strut Support, Rod Size: 3/8 Inch, Expands From 12.5" To 20" For Pipe Support, Material: Steel, Finish: Pre-Galvanized
Diameter: 0.375 in
Material: Steel
Finish: Pre-Galvanized
Product Thickness: 0.040 in
$13.61
Chase Nipple, 3/4", Type: Long, Zinc Die Cast By Arlington 502L
Chase Nipple, 3/4 Inch, Type: Long, Zinc Die CastDiameter: 3/4 in
$2.29
SN Series Nut, 3/8" Rod By nVent Caddy SN37
SN Series Nut. Rod Size: 3/8 in, Material: Steel, Finish: Electro Galvanized. Standard Package Quantity: 100.
Diameter: 0.375 in
Material: Steel
Height: 0.750 in
Finish: Electrogalvanized
$5.51
Split Grounding Bushing, 2", 14 - 1/0 AWG, Zinc Die Cast By Arlington 555
Split Grounding Bushing, 2 Inch Diameter, 14 - 1/0 AWG, Zinc Die Cast, For Use With Threaded or Unthreaded Rigid/IMC/EMT Conduit Material: Zinc Die Cast Diameter: 2 in Insulation: Insulated Allowable Gauge Range: 14 - 1/0 Material: Zinc Die Cast...
$21.84
ADK Strut End Cap, Gray By nVent Caddy ADK421GY
Strut End Cap, Polyethylene, Gray, For Types A And C Channels. (H) 1-5/8" x (W) 1-5/8"
Color: Gray
Material: Polyethylene
Height: 1.625 in
Width: 41.200 in
$1.14
Adjustable Throat Liner, 1", Non-Metallic By Arlington 4003
Adjustable Throat Liner, 1 Inch Diameter, Non-Metallic, for use to be installed in fittings after conduit, fitting and wire are in place.
Diameter: 1 in
Material: Non-Metallic
$3.39
81% OFF
1-1/4 inch EMT Compression Connector 114EDCCTCN
EMT Compression Connector, 1 1/4 inch, Material: Die Cast Zinc
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Diameter: 1 1/4 in
$5.32
$1.01
80% OFF
1-1/2 inch EMT Compression Connector 112EDCCTCN
EMT Compression Connector, 1 1/2 inch, Material: Die Cast Zinc
HOT DEAL, LIMITED QTY, NO SPECIAL ORDERS
Diameter: 1 1/2 in
$7.48
$1.49
2" Swedge Coupling, Deep Socket Double Bell Coupling 2PCPDSDB
PVC 2" Swedge Coupling, Deep Socket Double Bell Coupling
Material: PVC
Diameter: 2 in
$11.21
Rigid Threaded Insulating Bushing, 3/4" Diameter, Polypropylene, Gray By American Fittings PIB 75
PIB 75
7075 In stock
$0.26
Rigid Threaded Insulating Bushing, 3/4" Diameter, Polypropylene, Gray By American Fittings PIB 75
Rigid Threaded Insulating Bushing, 3/4 Inch Diameter, Impact Resistant Polypropylene, Gray
Diameter: 3/4 in
Color: Gray
Material: Polypropylene
Material: Polypropylene
$0.26
nVent CADDY Cat CR50 Low-Voltage Cable Retainer, 2" dia By nVent Caddy CATCR50
CATCR50
227 In stock
$1.71
nVent CADDY Cat CR50 Low-Voltage Cable Retainer, 2" dia By nVent Caddy CATCR50
2 Inch Low-Voltage Cable Support, Plastic
Material: Polypropylene
Diameter: 2 in
Material: Polypropylene
$1.71
Blank Knockout Seal, 3/4", Snap-In, Plastic By Arlington NM901
3/4", Knockout Seal, Snap-In, Non-Metallic, Package Quantity: 50.
Diameter: 3/4 in
Color: Gray
Material: Non-Metallic
$0.34
Wire Waffle, Multiple NM Cable Connector By Rack-A-Tiers KO25W
Wire Waffle, Multiple NM Cable Connector, Nylon, Black
Color: Black
Material: Nylon
$12.49
PVC Cement, Low-VOC, Arctic, 1 Quart By Rectorseal 55948
PVC Cement, Low-VOC, Arctic, 1 Quart, Specifically Designed For Use in Cold Weather
Color: Clear
Size: 1 quart
$21.07
Split Grounding Bushing, 1/2", 14 - 4 AWG, Zinc Die Cast By Arlington 550
Split Grounding Bushing, 1/2 Inch Diameter, 14 - 4 AWG, Zinc Die Cast, For Use With Threaded or Unthreaded Rigid/IMC/EMT Conduit Size: 1/2 in Material: Zinc Die Cast Insulation: Insulated Allowable Gauge Range: 14 - 4 Material: Zinc Die Cast...
$9.02
Liquidtight Connector, 45°, 1", Non-Metallic By Arlington NMLT45100
Liquidtight Connector, 45°, 1 Inch, Non-Metallic, For Type B
Diameter: 1 in
Material: PVC
$10.64
NM Cable Connector, Push-In, Plastic, 1/2" KO Size By Arlington NM94X
NM Cable Connector, Push-In, Plastic, 1/2" KO Size, 3/8" Trade Size. Install From Inside or Outside the Box.
Diameter: 1/2 in
Material: Plastic
$0.26
1/2" Steel Cord Grip, 0.125-0.187, Red Insert By Hubbell-Killark CG1250S
1/2" Steel Cord Grip, Cable Range 0.125 - 0.187, Red Insert Material: Steel
$8.15
