Conduit & Ducts
Trapeze Supports (50PK) By WBT TRAPSUPT
Trapeze Style Side Supports, Attaches To The Side Of The Tray, Suggested For Tray Sizes 16” Wide & Smaller (Box of 50)
Weight: 9 lb
Size: 3/8 in
$172.80
Ground Bolt/Lug By WBT GROUNDBOLT
Ground Bolt/Lug To Secure Ground Wire To Tray Sections, Conductive Copper for Ground/Bond Material: Copper
$10.75
Shelf/Wall Support, 8” By WBT SHELF SUPT 8
Shelf/Wall Support For 8” Wide Cable TrayWidth: 8 in
$15.16
Shelf/Wall Support, 4” By WBT SHELF SUPT 4
Shelf/Wall Support For 4” Wide Cable TrayWidth: 4 in
$10.11
Sold Out
Elbow 45-Degree Lay-in, 4.00x4.00, Gray, Steel By nVent Hoffman F44G45E
Lay-in Painted 45-Degree Elbows are used for continuous run with 45-degree turns. This 45-Degree Elbow Lay-in, F44G45E item measures 4.00x4.00 inches with a material of Steel colored Gray. IP/NEMA Rating: NEMA 1 Color: Gray Width: 4 in Height: 4 in...
$70.45
1-1/2" PVC 90° Elbow, 18" Radius, Schedule 40, Gray 112P90X18
1-1/2 Inch PVC 90 Degree Sweep Elbow, 18 Inch Radius, Schedule 40, Gray
Diameter: 1 1/2 in
Type: Schedule 40
Color: Gray
Material: PVC
Angle: 90°
Angle: 90°
Sweep Radius: 18 in
$29.97
Power Rated Fittings By Panduit T70TRIW
Transition Fitting, PVC, White, Used To Transition To Any LD Profile Or T-45 Raceway While Maintaining Channel Separation, Fitting Includes Bend Radius Insert
Color: White
Material: PVC
Length: 5.250 in
Height: 1.870 in
Width: 4.400 in
$30.82
NM FLAT ELBOW FO/CAT5 2900 WHITE By Wiremold 2911FO-WH
For right angle turns on same surface. Maintains 1 1/4" (32mm) bend radius when installing UTP and fiber optic cable. White
Length: 3 1/2 in
Color: White
$2.83
5" PVC 22-1/2° Elbow, Schedule 40, Gray 5P2212
5 Inch PVC 22-1/2 Degree Elbow, Schedule 40, Gray
Type: Schedule 40
Color: Gray
Diameter: 5 in
Material: PVC
Angle: 22 1/2°
$165.33
Wireway, Type 1, Screw Cover, 12" x 12" x 24", Steel, Gray, No KOs By nVent Hoffman F1212T124GVP
F1212T124GVP
10 In stock
$216.95
Wireway, Type 1, Screw Cover, 12" x 12" x 24", Steel, Gray, No KOs By nVent Hoffman F1212T124GVP
Lay-In Type 1 Screw Cover Wireway, Straight Section, Size: 12 Inch Wide, 12 Inch Deep, 2 Foot Length, 14 Gauge Steel, ANSI 61 Gray Polyester Powder Paint Finish, NO KNOCKOUTS Height: 12 in Width: 12 in IP/NEMA Rating: NEMA 1...
$216.95
Non-Metallic Device Bracket & Trim Ring 40N, White By Wiremold 40N2F31WH
Non-Metallic, Device Bracket, 40N2 / 60N2 Series. Size: 5-1/4" Length, 2-3/16" Width. For use with Ortronics TracJack Individual Jack System, Ortronics Series II Front-Loading Module System, and Wiremold Open System Communications Modules. Color: White. Length: 5 1/4 in Color: White...
$5.37
ALA GROUNDING ADPT By Wiremold ALA09
For connection of equipment grounding conductor to provide additional ground to raceway.
Material: Aluminum
Material: Aluminum
$6.03
PN10 Raceway External Elbow, White By Wiremold PN10F18WH
Non-Metallic, External Elbow, PN10 Series, Size: 1-5/8" Length. PVC, White
Color: White
Length: 1 5/8 in
$2.00
NM SWITCH FACEPLATE 5500 IVORY By Wiremold 5507SW
For covering standard toggle switches. Ivory
Width: 1 11/16 in
Color: Ivory
Length: 4 1/4 in
$3.82
2" PVC 45° Elbow, 24" Radius, Schedule 40, Gray, Bell End 2P45X24WBE
2 Inch PVC 45 Degree Sweep Elbow, 24 Inch Radius, Schedule 40, Gray, Bell End
Type: Schedule 40
Color: Gray
Material: PVC
Diameter: 2 in
Angle: 45°
Angle: 45°
Sweep Radius: 24 in
$29.09
NM TEE FITTING PN05 IVORY By Wiremold PN05F15V
PN5 Series T Fitting for branches of raceway running at right angles. 1" (25mm) bend radius. Finish - Ivory
Color: Ivory
Length: 2 15/16 in
Material: PVC
$2.46
Drop and Bracket Hangers, fits 6.00x6.00, Gray, Steel By nVent Hoffman F66GDB
F66GDB
6 In stock
$35.98
Drop and Bracket Hangers, fits 6.00x6.00, Gray, Steel By nVent Hoffman F66GDB
Drop and bracket hangers support a wireway run. This Drop and Bracket Hangers, F66GDB item fits 6.00x6.00 inches with a material of Steel colored Gray. IP/NEMA Rating: NEMA 1 Color: Gray Height: 6 in IP/NEMA Rating: IP30 Material: Steel IP/NEMA...
$35.98
Quick 3/8" Metal Decking Preset Anchor with Push-to-Install Technology - 830LB By nVent Caddy CRLM37EG
CRLM37EG
26 In stock
$9.17
Quick 3/8" Metal Decking Preset Anchor with Push-to-Install Technology - 830LB By nVent Caddy CRLM37EG
CRLM37EG
Material: Steel
Height: 5.600 in
Finish: Electrogalvanized
$9.17
Entrance End Fitting, 2300 Series Raceway, White By Wiremold 2310A-WH
Non-Metallic, Entrance End Fitting, 2300 Series. Size: 4-1/2" Length, 2-7/16" Width. Includes: 1/2", 3/4", 1" Trade Size KOs. PVC, White.
Color: White
Length: 4 1/2 in
Material: PVC
$7.62
40N2 CableSmart Base Clip By Wiremold 40N2F05WH
Non-Metallic, Base Clip, 40N2 Series, Size: 5/8" Length. PVC, White. For Use with 40N2B08 Raceway Base.
Length: 5/8 in
Color: White
$5.39
Coupler Fitting / LD5 Series Raceway, Off-White, Power Rated By Panduit CFX5IW-X
CFX5IW-X
55 In stock
$2.61
Coupler Fitting / LD5 Series Raceway, Off-White, Power Rated By Panduit CFX5IW-X
Power Rated Coupler Fitting for Power to 600V, Use With LD5, LDPH5 & LDS5 Raceway, Non-Metallic, Off-WhiteColor: White
$2.61
Wood Socket Driver, Red By Dewalt PFM2201150
Wood Socket Driver, For Use With Hangermate® Wood Rod Hangers, 1/4 in, 3/8 in Rod, Red
Color: Red
Color: Red
Color: Red
$11.23
4" PVC 30° Elbow, Schedule 40, Gray 4P30
4 Inch PVC 30 Degree Elbow, Schedule 40, Gray
Type: Schedule 40
Color: Gray
Material: PVC
Diameter: 4 in
Angle: 30°
Angle: 30°
$102.23
Horizontal Slotted Wiring Duct, 1RU, 1-1/2" x 3", Rear Only By Leviton 491RU-HFR
491RU-HFR
1 In stock
$52.44
Horizontal Slotted Wiring Duct, 1RU, 1-1/2" x 3", Rear Only By Leviton 491RU-HFR
Wire Duct, Horizontal, Slotted, 1RU, Front: H x W: 1.5" x 3", Rear H x W: 1.5" x 4". Color: Black. Includes: Cover.
Width: 3 in
Height: 1 1/2 in
Color: Black
Length: 19 in
$52.44
Raceway 2400 Series Transition Fee Fitting, Steel By Wiremold 2686FO
Raceway 2400 Series Transition Fee Fitting, Steel, Eliminates Need To Offset 2400 Series Raceway When Connecting with Surface Panel Boxes. Has 3/4" and 1" Concentric Trade Size KOs with 1" Trade Size KO Elongated So Adjustment From Surface To Center...
$19.08
Outside Corner Fitting, Series LD10, Non-Metallic, White By Panduit OCF10WH-X
OCF10WH-X
58 In stock
$2.14
Outside Corner Fitting, Series LD10, Non-Metallic, White By Panduit OCF10WH-X
Outside Corner Fitting, Series LD10, Non-Metallic, WhiteColor: White
$2.14
Cover Coupler, T-70 Series 2-Piece Raceway, Non-Metallic, Off White By Panduit T70CCIW-X
T70CCIW-X
17 In stock
$4.35
Cover Coupler, T-70 Series 2-Piece Raceway, Non-Metallic, Off White By Panduit T70CCIW-X
T-70 cover coupler fitting, PVC, White, Joins cover sections of T-70, Twin-70, and TG-70. raceway cover together
Color: Off-White
Material: PVC
Length: 0.440 in
Height: 0.440 in
Width: 2.760 in
$4.35
End Cap Fitting / T-70 Series Raceway, Off-White By Panduit T70ECIW
End Cap Fitting / T-70 Series Raceway, Off-White
Color: White
Material: PVC
Length: 1.960 in
Height: 1.860 in
Width: 4.400 in
$9.36
Entrance End Fitting By Panduit T70EEIW
Entrance end fitting. Conduit breakouts of 1/2", 3/4", 1" and 1 1/4" which allows entry from ceiling or wall.
Color: White
Material: Steel
Length: 6.090 in
Height: 2.860 in
Width: 5.710 in
$40.75
Coupler Fitting / T70 Series Raceway, Off-White, Minimum Bend By Panduit T70BCIW-X
T70BCIW-X
34 In stock
$9.01
Coupler Fitting / T70 Series Raceway, Off-White, Minimum Bend By Panduit T70BCIW-X
Coupler Fitting / T70 Series Raceway, Off-White, Minimum Bend
Color: White
Material: PVC
$9.01
