Boxes
Rectangular Floor Box Assembly, Duplex Cover, Brass By Allied Moulded FB-2
Rectangular Floor Box Assembly, Duplex Cover, 4.310 x 2.500 x 3.500, 24.500 Cubic Inches, Polycarbonate Box, Brass Cover Material: Polycarbonate Gangs: 1 Material: Brass Width: 2.500 in Depth: 3.500 in Standards: California Proposition 65 Height: 4.310 in Cubic Inches: 24.500...
$59.92
Single Gang Electrical Box By Allied Moulded P-122OW
Single Gang Electrical Box For Use With Nonmetallic Sheathed Cable
Depth: 3 3/4 in
Mounting: Clamp
Mounting: Bracket
Color: Black
Gangs: 1
Mounting: Ears
Cubic Inches: 22.500 in³
$3.84
Enclosure, Type 4X, Hinged Cover, 12" x 10" x 2-1/4" By Allied Moulded AMHMI120CCL
AMHMI120CCL
24 In stock
$99.24
Enclosure, Type 4X, Hinged Cover, 12" x 10" x 2-1/4" By Allied Moulded AMHMI120CCL
Enclosure, Type 4X, Hinged, Window Cover, HMI Clear Cover Kit, Size/Dims: 12 x 10 x 2-1/4 Inch, Polycarbonate/Gray Height: 12 in Material: Polycarbonate Mounting: Surface Color: Gray Depth: 2 1/4 in Width: 10 in Material: Polycarbonate IP/NEMA Rating: NEMA 4X...
$99.24
4-11/16 TO 4SQ ADPTR RING - 5/8 RSD -RED By Hubbell-Raco 911-16
Life Safety Steel Wall Box Covers - Painted Red, 4-11/16 In. Sq. x 4 In. Sq. Adapter, Raised 5/8 In., For Life Safety Appliances & Emergency Exit Signs
Color: Red
Material: Steel
Color: Red
Color: Red
$8.29
Flashing panel, 3/0, Pancake, Flat, 3-Coat/Lap Side By Quickflash E-PC3/O
Flashing Panel, Used on 3-Coat Stucco & Lap Siding, Rise: Flat, Fits Specified Pancake 3/0 Metal Boxes (See Compatibility Chart), 11-1/8" x 11-1/8" x 3/32".
Depth: 3/32 in
Height: 11 1/8 in
Width: 11 1/8 in
$5.88
Poke-Thru Device, Flush, Diameter: 7", Non-Metallic By Wiremold RC7ATCGY
RC7ATCGY
2 In stock
$317.34
Poke-Thru Device, Flush, Diameter: 7", Non-Metallic By Wiremold RC7ATCGY
Poke-Thru Device, Flush, Assembled Unit, Non-Metallic Cover, Color: Gray. Diameter: 7". Depth: 16-1/2". Includes: Duplex Receptacle (20 Amp, 125 Volt, NEMA 5-20R, 2P, 3W, Straight Blade), (2) Cat 6 TechChoice Discrete Keystone Connectors and Ortronics TracJack Bezels. For use with...
$317.34
4" Square Partition, Low Voltage, 4" x 4" X 2-1/8", Steel By Hubbell-Raco 707RAC
707RAC
91 In stock
$6.90
4" Square Partition, Low Voltage, 4" x 4" X 2-1/8", Steel By Hubbell-Raco 707RAC
Low Voltage Partition for 4" Square Box, Metallic. Fits: 2-1/8" Deep Boxes.
Material: Steel
Depth: 2 1/8 in
Depth: 2 1/8 in
$6.90
Weatherproof-In-Use Box, 1-Gang, Recessed, Vertical, Non-Metallic,White Cover By Arlington DBVM1W
DBVM1W
410 In stock
$21.54
Weatherproof-In-Use Box, 1-Gang, Recessed, Vertical, Non-Metallic,White Cover By Arlington DBVM1W
Weatherproof-In-Use Box, 1-Gang, Vertical Mount, 1-1/2 Inch, 22 Cubic Inches, White Cover, Includes: (1) Duplex, (1) Decorator/GFCI Receptacle Faceplate and (1) NM Cable Connector, For use in Stucco & Textured Surface Application. Mounting: Vertical Material: Plastic Gangs: 1 Color: White...
$21.54
Lid Marked "Telephone", 17" x 30" By Oldcastle Infrastructure 17304040
1730 Flash Cover, Telephone, Plastic, Green ***Does Not Include Bolts***
Color: Green
Width: 17 in
Height: 30 in
Depth: 18 in
Material: Polyethylene
$275.85
4 11/16 SQ 5/8 RSD 2 3/4 EARS CVR By Crouse-Hinds TP570
4 11/16 SQUARE 5/8 RAISED 2 3/4 EARS COVER
Mounting: Screw On
Depth: 5/8 in
Gangs: 1
Cubic Inches: 3.800 in³
$5.96
5" Ceiling Plate Cover By Arlington CP3540
Non-Metallic, Ceiling Plate Cover: for 3-1/2 Inch - 4 Inch, Round or Octagonal, Boxes. Color: White. Includes (2) #8-32 x 3/4 Inch Flat Head Screws and Bracket. Color: White
$2.89
Switch/Outlet Box, 1-Gang, Depth: 3-5/8", Nail-On, Non-Metallic By Carlon FN-23
FN-23
164 In stock
$4.09
Switch/Outlet Box, 1-Gang, Depth: 3-5/8", Nail-On, Non-Metallic By Carlon FN-23
Switch/Outlet Box, 1-Gang, Depth: 3-5/8", Cubic Inches: 22.5", Vapor-tight, New Work, Angled Side Nails, Non-Metallic
Color: Black
Gangs: 1
Depth: 3 5/8 in
Mounting: Nail On
Cubic Inches: 22.500 in³
$4.09
Three Gang Electrical Box By Allied Moulded P-643
Three Gang Electrical Box For Use With Nonmetallic Sheathed Cable
Gangs: 3
Mounting: Clamp
Color: Black
Mounting: Nail On
Depth: 3 9/16 in
Cubic Inches: 64 in³
$4.00
Fixture Support Box, Round, 3-1/2" Diameter, Non-Metallic, Polycarbonate By Allied Moulded PC223OW
PC223OW
425 In stock
$4.23
Fixture Support Box, Round, 3-1/2" Diameter, Non-Metallic, Polycarbonate By Allied Moulded PC223OW
Fixture Support Box, Round, 3-1/2 Inch Diameter, Non-Metallic, Polycarbonate, Black, For Use With Nonmetallic Sheathed Cable
Material: Polycarbonate
Depth: 2 13/16 in
Mounting: Clamp
Mounting: Bracket
Color: Black
Material: Polycarbonate
Cubic Inches: 21.500 in³
$4.23
Nickel-plated replacement cover for FB-2N By Allied Moulded FB-2NCVR
ALL FB-2NCVR RCT DPL NI CVR K
Material: Rubber
Standards: California Proposition 65
$49.10
1g Adjustable Mud Ring By Crouse-Hinds AMR1
Crs-h Amr1 1g Adjustable Mud
Gangs: 1
Material: Steel
Depth: Adjustable
Depth: 3/4 - 1 1/2 in
$11.50
Flashing Panel, 1-Gang, Size: 11 x 11", Blue, Non-Metallic By Quickflash E-SGB-A 1 3/8"
E-SGB-A 1 3/8"
306 In stock
$5.88
Flashing Panel, 1-Gang, Size: 11 x 11", Blue, Non-Metallic By Quickflash E-SGB-A 1 3/8"
Flashing Panel, Used on 1-Coat Stucco & EIFS Systems, Rise: 1-3/8, Fits Allied Molded Electrical Single Gang Box (part # 9327-N ONLY), 11-1/8" x 11-1/8" x 3/32", Non-Conductive.
Depth: 3/32 in
Height: 11 1/8 in
Width: 11 1/8 in
$5.88
Fan/Fixture Box, 45° Sloped Ceiling, Non-Metallic By Arlington FB450
Fan/Fixture Mounting Block with Built-In Electrical Box, Non-Metallic, Textured & Paintable Surface. Fan Weight: 70 lbs. Fixture Weight: 200 lbs. Cubic Inches: 14.5". Includes: (1) NM Cable Connector & (4) Parked Screws. For use on Sloped up to 45 Degree...
$37.09
Switch/Outlet Box, 3-Gang, 3-1/2" Deep, Non-Metallic By Arlington F103
3-Gang, Screw-On, New/Old Work, Switch/Outlet Box, Non-Metallic, Depth: 3-1/2". Cubic Inches: 61".
Gangs: 3
Depth: 3 1/2 in
Mounting: Screw On
Material: Plastic
Cubic Inches: 61 in³
$6.88
Switch/Outlet Box, 1-Gang, Depth: 1-3/4", Nail-On, Non-Metallic By Thomas & Betts SNO-18
SNO-18
271 In stock
$6.39
Switch/Outlet Box, 1-Gang, Depth: 1-3/4", Nail-On, Non-Metallic By Thomas & Betts SNO-18
1-Gang, Nail-On, Switch/Outlet Box with Hinge Enclosure, Non-Metallic, Depth: 1-3/4". Cubic Inches: 18".
Color: Blue
Gangs: 1
Mounting: Nail On
Depth: 1 3/4 in
Cubic Inches: 18 in³
$6.39
Junction Box, NEMA 12, Hinged Cover, 8" x 8" x 4" By nVent Hoffman A808CH
A808CH
44 In stock
$120.43
Junction Box, NEMA 12, Hinged Cover, 8" x 8" x 4" By nVent Hoffman A808CH
Junction Box, NEMA 12, Hinged Cover, 8 x 8 x 4 Inch, Steel/Gray
Depth: 4 in
Mounting: Surface
Width: 8 in
IP/NEMA Rating: IP65
Material: Steel
Height: 8 in
Special Program: Hoffman On Demand
IP/NEMA Rating: NEMA 12
$120.43
4" Square Extension Ring, 1-1/2" Deep, Welded, Metallic By Appleton 4SSBESPL
4SSBESPL
763 In stock
$7.22
4" Square Extension Ring, 1-1/2" Deep, Welded, Metallic By Appleton 4SSBESPL
4" Square, Extension Ring, Welded, Metallic. Depth: 1-1/2". Side Knockouts: (8) 1/2" & (4) 3/4". Cubic Inches: 21.0". Combo Extension-Thru-Ring. Top has (2) 8-32 Screws & Bottom has Cutout for Switch or Handy Box. Knockout Diameter: 1/2 in Gangs: 2...
$7.22
SLIDERBOX® 1-Gang Fiberglass Outlet Box By Allied Moulded 1099-AB
SLIDERBOX® Single-Gang Fiberglass Outlet Box, External Mounting Plate For Use In Wood Or Steel Non-Load-Bearing Studs 25 Gauge Or Lighter, ½" Knockout, Depth Adjustable From 0"-2", 3-9/16" x 3-3/8" x 3.83"
Material: Fiberglass
Gangs: 1
$6.67
Mounting Block, 5" x 7", Dutch Lap Siding - White By Arlington MB5771
Mounting Block, 5" x 7", For Dutch Lap Siding, WhiteColor: White
$6.09
Adjustable Sliderbar Box Kit, 1-Gang, Steel/Non-Metallic By Arlington SL1B18
SL1B18
74 In stock
$7.31
Adjustable Sliderbar Box Kit, 1-Gang, Steel/Non-Metallic By Arlington SL1B18
Adjustable Sliderbar Box Kit, Includes: (1) SL18 SliderBar 10.500 - 17 Inch Adjustable Length, (1) SLB101 1-Gang Non-Metallic Box With Installation Screws and Slider Clip Depth: 3 in Length: 17 in Gangs: 1 Material: Steel Material: Non-Metallic Length: 10.500 in...
$7.31
Three gang electrical box for use with nonmetallic sheathed cable By Allied Moulded 3300-Z4K
3300-Z4K
111 In stock
$6.51
Three gang electrical box for use with nonmetallic sheathed cable By Allied Moulded 3300-Z4K
ALL 3300-Z4K 46 CI 3G DEVICE
Gangs: 3
Material: Steel
$6.51
Low Voltage Divider Plate By Allied Moulded LVP-2
Low Voltage Divider Plate For Use With (P-442, P-643, P-764 Series) Flexbox New Work Products (P-240Ow, P-352Ow) Flexbox Old Work Products And (Sb-2, Sb-3, Sb-4) Sliderbox Adjustable Box ProductsColor: Orange
$1.10
Rectangular Floor Box Assembly By Allied Moulded FB-2N
Rectangular Floor Box Assembly With A Nickel Plated Brass Duplex Device Cover
Color: Black
Gangs: 1
Standards: California Proposition 65
$67.41
3-1/2" Round Ceiling/Fixture Box, Depth: 2", Old Work, Non-Metallic By Allied Moulded 9338-EK
9338-EK
156 In stock
$2.05
3-1/2" Round Ceiling/Fixture Box, Depth: 2", Old Work, Non-Metallic By Allied Moulded 9338-EK
3-1/2" Diameter, Old Work Ceiling/Fixture Box with Speed Clamps with Tapped Device Holes, Thermoset Fiberglass, Depth: 2". Cubic Inches: 14.0". Fixture Weight: 15 lbs. Includes: Ears Mounting: Clamp Diameter: 3 1/2 in Depth: 2 in Material: Fiberglass Mounting: Ears Diameter:...
$2.05
Sold Out
Steel Box Flashing Panel 4/0 By Quickflash E-4/OB
Used on 5/8" Depth 3-Coat Stucco and Lap Siding. Fits Specified Electrical 4/0 Plastic Boxes Only. 11 1/8" x 11 1/8" x 3/32"
Depth: 3/32 in
Height: 11 1/8 in
Width: 11 1/8 in
$5.88
